Arin LogoArin
Geri

Baryum sülfat

BARIUM SULFATE

İşaretli0 ürün
CAS
7727-43-7
EC
2317844
PubChem CID
24414
Moleküler Formül
BaO4S
Moleküler Ağırlık
233.3900 g/mol

Rengi veren, inorganik mineraldir; bilinen zararı ciğer ve bağırsak hassasiyeti yaratmasıdır.

Ne işe yarar?

Ürüne renk verir; ürünü mat ve donuk gösterir.

Ayrıntı

Doğal baryum mineralinin saf hali ya da sentetik olarak üretilen, bej-beyaz bir toz. Ürüne donuk, mat bir renk kazandırır ve rengin depolama süresince sabit kalmasını sağlar. Suda çözünmeyen, inorganik yapısıyla sistemik emilim riski yok denecek kadar düşüktür. Yutulmadığı sürece toksik değildir; ancak solunduğunda akciğer tahrişi ya da hassas bağırsaklara dokunabilecek bir irritandır. Cilde doğrudan temas etmek zarar vermez.

İşlevler

Kısıtlar

Fonksiyon ve Kullanım

Kozmetik Boyar Madde

Matlaştırıcı

Düzenleyici not

  • EU 1223/2009 Annex IVİzinli
Hüküm bizim değil: aşağıda ToxValDB (EPA Toksisite Değerleri Veri Tabanı), CIR (Kozmetik Madde İnceleme Paneli) ne dediyse o yazıyor.

Kaynaklar Ne Diyor

CIR (Kozmetik Madde İnceleme Paneli)3
Kimyasal özelliklerKaynağa git →

The inorganic sulfates (See Figure 1) are salts of sulfuric acid. Except for the ammonium salts, these ingredients are mineral salts readily found in nature (but may also be easily synthesized).3 While most of these ingredients are readily soluble in water, barium sulfate is virtually insoluble, and almost no absorption occurs even when passed through the human digestive tract (making it a non-toxic, imaging contrast agent).4 Figure 1. Inorganic Sulfates – wherein “M” is an ammonium or metal cation The formulas of the inorganic sulfates reviewed in this safety assessment are included in Figure 2.5 Table 1 contains the definitions and functions of these cosmetic ingredients. Physical and Chemical Properties Properties of inorganic sulfates reviewed in this safety assessment are included in Table 2.6 Method of Manufacture The inorganic sulfates are typically manufactured by mining of natural minerals (as many inorganic sulfates occur naturally in hydrated form) or by reaction of available ore or inorganic oxides, hydroxides, or carbonates, with sulfuric acid.3 These methods produce hydrated inorganic sulfates. To produce the anhydrous salts, an additional step of dehydration (e.g., by heating and reduced pressure) must occur. For example, hydrated magnesium sulfate can be mined as kieserite or epsomite (Epsom salts), or it can be prepared by dissolving magnesium oxide, magnesium hydroxide, or magnesium carbonate in sulfuric acid. Heating of this hydrate reversibly drives off water and produces anhydrous magnesium sulfate (a potent desiccant). Distributed for Comment Only -- Do Not Cite or Quote Composition/Impurities Barium Sulfate … [kırpıldı — bölüm toplam 212011 karakter]

Kimyasal özelliklerKaynağa git →

Definition and Structure Barium sulfate (CAS No. 7727-43-7) is the inorganic salt that conforms to the formula that is included in Figure 2 below.1 It is the barium salt of sulfuric acid. BaSO 4 Figure 2. Formula for Barium Sulfate Physical and Chemical Properties Barium sulfate, available in the form of polymorphous crystals, has a molecular weight of 233.39, and is soluble in sulfuric acid, but insoluble in water.2 Method of Manufacture Barium sulfate may be produced by treating a solution of barium salt with sodium sulfate (salt cake).3 Composition/Impurities Barytes is the naturally occurring rock form of BaSO 4 .4 A study was performed to characterize the mineralogical forms of barium and the trace heavy metal impurities in commercial barytes of different origins using electron probe microanalysis (EPMA), X-ray diffraction (XRD), and inductively coupled plasma mass spectrometry (ICP-MS). Qualitative EPMA results indicated the presence of different minerals in commercial barytes, including barite (BaSO 4 ), barium feldspar, galena (PbS), pyrite (FeS 2 ), sphalerite (ZnS), quartz (SiO 2 ), and silicates. Quantitative EPMA confirmed that the barite crystals in the barytes contain some strontium and a little calcium, whereas, trace heavy metals occur in the associated minerals. Analysis of aqua regia extracts of barytes samples by ICP-MS has indicated the presence of a large number of elements in the associated minerals. Arsenic, copper, and zinc concentrations correlate closely in all 10 samples. Chromium has been detected in commercial samples of pharmaceutical grade barium sulfate at concentrations ranging from 0.45 to 1.06 µg/g.5 … [kırpıldı — bölüm toplam 18606 karakter]

Genel değerlendirmeKaynağa git →

CIR tentative (2014): The CIR Expert Panel concluded that barium sulfate is safe in the present practices of use and concentration in cosmetics, when formulated to be non-irritating.

ToxValDB (EPA Toksisite Değerleri Veri Tabanı)4
Zarar bildirimiKaynağa git →

EPA ToxValDB cilt/göz verisi — endpoint: eye irritation: in vivo, sınıflandırma: Studies Indicate No Significant Irritation, tür: rabbit, çalışma: eye irritation, kılavuz: OECD Guideline 405 (Acute Eye Irritation / Corrosion) , 2002-04-24 according to, yıl: 2010. Sınır: bu bir derleme kayıttır; doz, tür ve maruziyet yolu birlikte değerlendirilmelidir.

Zarar bildirimiKaynağa git →

EPA ToxValDB cilt/göz verisi — endpoint: Skin Sensitization, sınıflandırma: Classification not possible. Sınır: bu bir derleme kayıttır; doz, tür ve maruziyet yolu birlikte değerlendirilmelidir.

Zarar bildirimiKaynağa git →

EPA ToxValDB cilt/göz verisi — endpoint: Eye Irritation, sınıflandırma: Classification not possible. Sınır: bu bir derleme kayıttır; doz, tür ve maruziyet yolu birlikte değerlendirilmelidir.

Zarar bildirimiKaynağa git →

EPA ToxValDB cilt/göz verisi — endpoint: Skin Irritation, sınıflandırma: Classification not possible. Sınır: bu bir derleme kayıttır; doz, tür ve maruziyet yolu birlikte değerlendirilmelidir.

Bilimsel Referanslar